Voip Innovations- Outbound

Status
Not open for further replies.
zenvoip

zenvoip

Member
Jul 19, 2018
36
2
8
59
I am using Skyetel and Voip Innovations as well.
I have no issues with inbound call with voip innovations.
I am having issues with outbound calls going out please.
 
Well... have you checked the logs or sngrep when placing an outbound call? If you posted those, that would be helpful..
 
sip id.jpg
So do have out bound calls working now were I am stuck is the Voip Innovations stated that this what is coming over as caller ID.
I did setup the Gateways as external.
After that I am stuck..
 
Make sure not to use the formatting for the number as carriers typically want to see numeric only.
 
Sounds like you need to add an outbound route for E911.

Dialplan > Outbound Routes > Add
Choose your gateway
Hit the dropdown for dialplan selection and select 911 Emergency.
 

Attachments

  • Screen Shot 2018-11-28 at 4.02.59 PM.png
    Screen Shot 2018-11-28 at 4.02.59 PM.png
    123.9 KB · Views: 25
Do you have something specified in the Emergency Caller ID and Emergency Caller ID Number for the extension that you are attempting to call 911/933 with?
 
I use Voip Innovations without issue.
Make sure the gateway is set to no register, you have a dummy username/pass, and, under advanced, set Caller ID in From to true.
 
I did all that It was still giving me that message on pcap.
1543524603123.png
paradym said:
I use Voip Innovations without issue.
Make sure the gateway is set to no register, you have a dummy username/pass, and, under advanced, set Caller ID in From to true.
Click to expand...
canyou give me call please at 209-370-1930
 
In the gateway advanced settings set caller id in from to true. Then stop and start the gateway.
 
Status
Not open for further replies.
Top Bottom