Trunk Incoming Calls Issue

[mcs3ss2]

Hi Guys
Please help a newbie here
I have 2 PBX. PBX-Main and PBX-Test
I created a SipTrunk and created a Destination and linked it to trunk (action settings)

The Sip Trunk that I created works fine and registers with PBX-Test as Gateway

The I created and Extension on PBX-Test and Created a Destination on PBX-Test and Linked it to previiously extension. I called this extention 100.
This extention (on PBX-Test) registers with Any softphone, Cisco504G Phone and Yealink T29G, No problem there.

However here is the problem. When I call the designated number (Example 0299998888) which is the call drops. The call does hit from PBX-Main to PBX-Test but then I donot hear the phone ringing. Instead It goes to default message Extention 4444 (Which is Trunk Extension on PBX-Main) is not available.

Here is How I know that the call does hit the PBX-Test. SNGREP Screen Shot



Any one understands what is going on and willing to help please ?

Thanks, Sheeraz

 

[mcs3ss2]

Please any one, Any input on this issue?

 

[mcs3ss2]

Hi Guys, anyone with bit of knowledge willing to chip in ?

 

[DigitalDaz]

You have missed out loads of information here on how you have linked these two PBXs.

 

[mcs3ss2]

Created an ext on main pbx and assig destion (DID) to that ext then regestered that extention on test pbx as gateway
added main pbx ip to test pbx ACL

Here is the EXT Image on main pbx


Gere is the GW image on test pbx


Here is local ext on test pbx


Here is the local destination on test pbx



SSNGREP Image of the invite already attached in the OP

Thanks for looking into this,
Sheeraz

 

[DigitalDaz]

Sorry, I can't help here, I haven't done this but I'm sure the methodology is not correct. Have a search around in here for linking two fusionpbx together.

 

[mcs3ss2]

Thank you @DigitalDaz

 

[mcs3ss2]

As far as the methodology goes, my upstream provider have given me trunk (ext on his pbx with destination set to ext that they created for me)
and it works on my main pbx

 

[mcs3ss2]

Hi Huys, Anyone else here care to share their exp please on this particular issue?
Much appreciated.