Hello, I hope you can help me, my telephone provider gives me the service through an internet link, on a last mile switch port, it tells me which IP I should place in my exchange and to which IP I should send the SIP registration and the rtp data, I have been able to configure this very easily in Asterisk by simply connecting directly from the port on the switch to a server interface and creating two static routes to the registration IP and to the rtp IP, finally I configure the normal parameters of the SIP trunk and that's it I have incoming and outgoing calls, but in fusionpbx it is not that simple I need help to configure it
sip trunk over an internet service
- Thread starter kristiam garcia
- Start date
- Status
This is what the supplier gives me
The supplier gives me what I attach in the image.
According to that, my server has two interfaces
eth0 192.168.44.10/23
eth1 10.72.40.252/29
and the routes were created
destination gateway
10.119.16.251/32 10.72.40.251
10.119.25.2/32 10.72.40.251
With this I reach the ips without problem.
I configure the gateway normally I add it in the acls but I still can't execute the call, it gives me time out
Attachments
- Status