letsencrypt install certificate fail

Status
Not open for further replies.
M

MORAES

New Member
Aug 8, 2023
12
0
1
33
Good morning gentlemen, I would like some help, I have a problem installing a certificate in fusionpbx.

I have already installed both Debian 11 and Fusion 20.04, both are experiencing problems.


When trying to install a certificate, an error occurs in nginx as shown in the screenshot.


There is no firewall, I left everything open, as this is an installation from scratch
 

Attachments

  • erro.jpg
    erro.jpg
    143.1 KB · Views: 10
M

MORAES

New Member
Aug 8, 2023
12
0
1
33
Neyamt said:
Is the server assigned public ip address directly ? or somewhere NAT is used
Click to expand...


No, this domain is pointed to a public IP, this machine is an Oracle cloud that I created.

Since the installation, I have already done the installation with this domain, everything was fine, only when installing the certificate does this problem occur.
 
N

Neyamt

Member
Nov 12, 2021
52
5
8
29
M

MORAES

New Member
Aug 8, 2023
12
0
1
33
Neyamt said:
Please follow this and telnet your public ip address/public hostname from outside, with ports 80,443 once you got assured try again the script.


dev.to

Opening up port 80 and 443 for Oracle Cloud servers

Are you working on setting up your Oracle Cloud server and are facing issues with sites rendering as...
dev.to dev.to
Click to expand...
Thank you for providing the guidance, but I already have a fusion in production with an older version running in the same cloud, the doors are 100% open in the cloud. I'm really intrigued by these problems, I'm going to try to do it on Amazon's cloud to see if the same problem occurs
 
C

cemotyz09

Member
Apr 23, 2020
83
7
8
I am using an Oracle instance as well and it works. I had issues before but I'm almost certain that wasn't the error I was getting, it seems your letsencrypt credentials may be wrong from the error. My error was I hit the quota limit, I can't remember if I got a 400 or something else but I'd check that's not the issue. You can try using the letsencrypt-test server to see if that works.
 
M

MORAES

New Member
Aug 8, 2023
12
0
1
33
cemotyz09 said:
I am using an Oracle instance as well and it works. I had issues before but I'm almost certain that wasn't the error I was getting, it seems your letsencrypt credentials may be wrong from the error. My error was I hit the quota limit, I can't remember if I got a 400 or something else but I'd check that's not the issue. You can try using the letsencrypt-test server to see if that works.
Click to expand...
very strange because the server is from scratch, as this is wrong, I'm doing everything step by step, I even changed the ways of installing, and different systems, I find this very strange.

How do I use this test?
 
M

MORAES

New Member
Aug 8, 2023
12
0
1
33
cemotyz09 said:
You did check it's using the correct VCN and that has the ports open right?
Click to expand...
sim as portas estão abertas, eu tenho um fusion mais antigo inclusive na oracle de produção essa nova versão que estou instalando para dev não funciona de jeito nenhum
 
M

MORAES

New Member
Aug 8, 2023
12
0
1
33
I just made a new one here and the same error remains, the one in the print is Debian, now I made it to Ubuntu and it continues to give the same problems
 
Status
Not open for further replies.
Top Bottom