How to enable TLS in Fusion PBX

[kwangmien]

Hi,

I am using Fusion PBX version 4.4.6.

I am trying to enable TLS for one of my extensions in Fusion PBX.

However, in the Fusion Web Portal, I could not find any TLS settings in the Accounts -> Extension.

Can anyone advise how to enable TLS for extension ?

Thanks.


Regards,
Kwang Mien

 

[Adrian Fretwell]

There is nothing to set up in the Extension record. You need to configure your system to accept TLS connections, then configure your endpoint device to use TLS and connect to the TLS port specified in your FusionPBX configuration. Link to the documentation page below:

https://docs.fusionpbx.com/en/latest/additional_information/sip_tls.html

 

[kwangmien]

Thanks for the info.
I followed the steps and the output from the Status -> SIP Status shows that 5061 and 5081 (both TLS ports) is running.
However, when I do a netstat on the server, 5061 and 5081 are not opened. My IP Phone configured as TLS cannot register to Fusion PBX.

Can I know what other settings has to be done ? Are there any logs i can refer to check what is the issue ?



Thanks.

 

[dev]

I am also facing same issue, netstat on the server, 5061 and 5081 are not opened. Could you please tell how to resolve it?

 

[purrdeta]

I am also facing same issue, netstat on the server, 5061 and 5081 are not opened. Could you please tell how to resolve it?

I had to restart the freeswitch process with `systemctl restart freeswitch.service` to get it to fully listen. I don't know if I skipped a step or could have done it another way.

 

[dev]

thanks

I had to restart the freeswitch process with `systemctl restart freeswitch.service` to get it to fully listen. I don't know if I skipped a step or could have done it another way.

Thanks a lot. Yes i also tried the same and it worked.

 

[Bifur]

Just fyi for anyone else... I had to restart Freeswitch as well to get it to fully listen. This is in the latest master branch (I believe): 4.5.32