Gateway Stop/Start from extern with API ?

[MrWeb]

Hi @ all,
is there a way to Stop/Start a Gateway from external ?
I have problems with the DSL Router. After a new dialin the the phones are a very long time
not accessible from the outside. Also calls to the outside are not working.
If i stop and start the gateway in fusionpbx all is working again.
Now is search for a solution, to stop/start the gateway with a curl command from the
dsl router (dialin script)
Any ideas ?

Best regards,
MrWeb

 

[DigitalDaz]

If you are doing it from the PBX itself there is no need to curl. I would if I were you though, try and solve the problem itself. You may just be hitting NAT timeouts and all restarting the gateway does is refresh the tunnel. Maybe lower your register time down to 120 seconds on the gateway instead and see if that works.

You can execute any of the commands by doing as an example:

fs_cli -x "sofia profile external restart"

Or anything else you can run within fs_cli.

 

[MrWeb]

Thank you, that helps.
With the timeouts, i have the minimum that the provider supports.
But the porblems are the same.
So i can run a restart automaticly when the dsl dial in.

Thank you very much.