I have installed FusionPBX on Debian 11. I have facing the issue about making calls. I have restart the sofia status internal and external but external-ipv6 is not running that's why i think I'm facing this issue. Please guide me
Error Creating SIP UA for profile: external-ipv6
- Thread starter hawksploit
- Start date
- Status
when I ran into this issue I changed the sip ports in the sip profiles that were failing. instead of using a variable `$${external_sip_port}` and `$${external_tls_port}` change them to an unused sip port #s. sip-port = `5062` and tls-sip-port `5063` for example. Save sip profile then restart freeswitch (or restart the server).
image from external-ipv6 sip profile
image from external-ipv6 sip profile
I have done this step but the same issue. The external-ipv6 profile isn't started. It's giving the error like this..
Attachments
This looks like the issue: It appears new(ish) installations have sip profiles that are referring to variables on Advanced > Variables that no longer exist. 
An oversight in changes to the code.
1. edit each internal sip profiles
2. make sure the sip-port variable is set to 5060 and NOT a variable name
3. make sure the tls-sip-port variable is set to 5061 and NOT a variable name
4. save after edit
5. edit each external sip profiles
6. make sure the sip-port variable is set to 5080 and NOT a variable name
7. make sure the tls-sip-port variable is set to 5081 and NOT a variable name
8. save
9. restart freeswitch
10. go to Status > SIP Status and verify all sip profiles are running
An oversight in changes to the code.1. edit each internal sip profiles
2. make sure the sip-port variable is set to 5060 and NOT a variable name
3. make sure the tls-sip-port variable is set to 5061 and NOT a variable name
4. save after edit
5. edit each external sip profiles
6. make sure the sip-port variable is set to 5080 and NOT a variable name
7. make sure the tls-sip-port variable is set to 5081 and NOT a variable name
8. save
9. restart freeswitch
10. go to Status > SIP Status and verify all sip profiles are running
This looks like the issue: It appears new(ish) installations have sip profiles that are referring to variables on Advanced > Variables that no longer exist.
1. edit each internal sip profiles
2. make sure the sip-port variable is set to 5060 and NOT a variable name
3. make sure the tls-sip-port variable is set to 5061 and NOT a variable name
4. save after edit
5. edit each external sip profiles
6. make sure the sip-port variable is set to 5080 and NOT a variable name
7. make sure the tls-sip-port variable is set to 5081 and NOT a variable name
8. save
9. restart freeswitch
10. go to Status > SIP Status and verify all sip profiles are running
I have already edited the internal sip profiles to 5060 and 5061 and also external sip profiles to 5080 and 5081. But the issue is external ipv6 isn't running. When i restart the freeswitch, it gives this logs..
Attachments
Are you using ipv6? If not, this shouldn't affect the pbx working. I just tend to disable the ipv6 profiles.
Basically the issue i'm facing is i'm not making calls. I have created extensions but it doesn't registered on softphone. The error it gives is Request timeout error and when i use TLS on softphone then it gives Service Unavailable error.
And the freeswitch logs are:
Last edited:
- Status