SOLVED Cisco SPA Autoprovision
- Thread starter Frank
- Start date
- Status
We've given it a go, but we use SSL to connect to the provisioning server which creates headaches for the SPA122/112.
From what we could gather, if you're using SSL then you need to send Cisco the SSL csr and key and they provide a CA file that can be uploaded to the 122/112 device so you can connect. It was a few months ago, so my recollection is a bit hazy.
We're not using a self-signed cert, but it seems cisco strip down the CA's in the unit
From what we could gather, if you're using SSL then you need to send Cisco the SSL csr and key and they provide a CA file that can be uploaded to the 122/112 device so you can connect. It was a few months ago, so my recollection is a bit hazy.
We're not using a self-signed cert, but it seems cisco strip down the CA's in the unit
I'm not trying TLS at this point. Just trying standard HTTP provisioning.
I need to know the path I should enter in the profile rule.
http://pbxaddress/app/provision does not work
I need to know the path I should enter in the profile rule.
http://pbxaddress/app/provision does not work
interface: eth0 (xxx.xxx.xxx.0/255.255.240.0)
filter: (ip or ip6) and ( port 80 )
####
T 206.108.227.201:28870 -> xxx.xxx.xxx.xxx:80 [AP]
GET /app/provision/$mac=5006AB96906A HTTP/1.1.
Host: 138.197.138.100:80.
User-Agent: Cisco/SPA122-1.4.1(002) (CCQ195113QH).
Connection: close.
.
##
T 138.197.138.100:80 -> 206.108.227.201:28870 [AP]
HTTP/1.1 404 Not Found.
Server: nginx/1.6.2.
Date: Fri, 10 Nov 2017 18:46:59 GMT.
Content-Type: text/html.
Content-Length: 168.
Connection: close.
.
<html>.
<head><title>404 Not Found</title></head>.
<body bgcolor="white">.
<center><h1>404 Not Found</h1></center>.
<hr><center>nginx/1.6.2</center>.
</body>.
</html>.
filter: (ip or ip6) and ( port 80 )
####
T 206.108.227.201:28870 -> xxx.xxx.xxx.xxx:80 [AP]
GET /app/provision/$mac=5006AB96906A HTTP/1.1.
Host: 138.197.138.100:80.
User-Agent: Cisco/SPA122-1.4.1(002) (CCQ195113QH).
Connection: close.
.
##
T 138.197.138.100:80 -> 206.108.227.201:28870 [AP]
HTTP/1.1 404 Not Found.
Server: nginx/1.6.2.
Date: Fri, 10 Nov 2017 18:46:59 GMT.
Content-Type: text/html.
Content-Length: 168.
Connection: close.
.
<html>.
<head><title>404 Not Found</title></head>.
<body bgcolor="white">.
<center><h1>404 Not Found</h1></center>.
<hr><center>nginx/1.6.2</center>.
</body>.
</html>.
Yes it is. If I specify http://pbxaddress/app/provision/xxxxxxxx.cfg the ATA receives the file but it seems that the config it receives overwrites the ip address of both the Lan and Wan of the SPA122 with 0.0.0.0 I am going to investigate further on monday.
Thanks for the help.
Thanks for the help.
Ok I'm having trouble with this too @Frank
On the SPA112 webgui, where exactly do you put http://pbxaddress/app/provision/xxxxxxxx.cfg? Or did you do the http://192.168.10.142/admin/resync?http://pbxaddress/app/provision/xxxxxxxx.cfg in the browser? Cisco gets so confusing with their verbiage and instructions and I can't seem to even get mine to attempt. Thanks for your help.
On the SPA112 webgui, where exactly do you put http://pbxaddress/app/provision/xxxxxxxx.cfg? Or did you do the http://192.168.10.142/admin/resync?http://pbxaddress/app/provision/xxxxxxxx.cfg in the browser? Cisco gets so confusing with their verbiage and instructions and I can't seem to even get mine to attempt. Thanks for your help.
Hi in the spa112 you put it in Voice-Provisioning - Profile Rule -
Correct format is http://pbxaddress/app/provision/?mac=$MA
Dont forget to set the Transport Protocol to HTTP or HTTPS
You also have to reboot the ATA
Correct format is http://pbxaddress/app/provision/?mac=$MA
Dont forget to set the Transport Protocol to HTTP or HTTPS
You also have to reboot the ATA
for those who need credentials
[--uid myUser --pwd myPass]http://mydomain.com/app/provision/?mac=$MA
[--uid myUser --pwd myPass]http://mydomain.com/app/provision/?mac=$MA
- Status