provisioning

Hello, the standard template provide by FusionPBX for provisioning of Linphone app is working for me on Android mobile and on Windows PC. The shipped default template comes with the setting "transient_provisioning = 1" what ends up in an onetime provisioning. I tested with the setting...

Greetings I am configuring the provisioning mode of the GrandStream GRP 2612 W phones. Can I send the Wi-Fi network name and password through provisioning in FusionPBX? Can someone help me?

All the phones I need to provision are yealink handsets. The provisioning works fine using the [mac].cfg file and this has always been enough up until now. I now have a requirement to make use of the super_search.xml, favorite_setting.xml and y0000000000xx.cfg files as well, but here I have...

Whenever I go to DEVICE and click Provision, there is a white screen and in the upper left hand side it says INVALID USER Not sure what causes this. Any ideas?

I have never had success using the device.prov.upgradeServer parameter. Polycom forums and documentation seems to state that this only affects the firmware upgrade utility in the web interface, and breaks automatic firmware upgrades via provisioning. I created a pull request a while back to add...

Hi, I'm new to PBX's and VoIP phones in general and I have installed Fusion PBX and got 2 phones working. It was a bit of luck and guessing but I think it has something to do with the provisoning, or auto provisioning. So far I have gathered its like a way to get the phone registed to...

Hi, I probably won't be using Sangoma phones moving forward but have a customer moving from FreePBX and need to re-use existing handsets. I am currently trying to provision some S505 handsets, but having 2 problems and not sure where the issue lies. 1. The first issue is I can only use HTTP...

Hi all, I am having an issue with Auto provisioning the GRP2613 phones, we also have some GXP2170s that provisioned perfectly fine but the GRP2613 do not want to. We can manually provision them and they work, but we would like to get the auto provisioning working. We used the same auto...

Hi All, It's my first post here and I'd like to share what we are working on in Ringotel. There are lots of softphones to choose from, but when it comes to softphone deployment there are not so much for FusionPBX: users need to configure them manually, use different apps on PC and mobiles with...

Having an issue it getting provisioning working. Went throught the docs, forums, videos, etc. ad nauseam and all variables look like they are set correctly. Rebooted Fusionpbx and no change. I setup a test install with current FusionPBX v4.5.15 master to get provisioning working with the...

Hello All, Anybody have or know how to do fusionPBX provisioning templet for the Fanvil Fanvil x5u and x2010 . FusionPBX default dose does not have those phone listed any help would be greatly appreciated Thanks

I have everything working fine provisioning Polycoms over https:// for multiple domains. But, am fighting to get the PUT's working, Items explored web_dav permissions in nginx rewrites in nginx by domain Is there anyone here who can throw some light on this. Thanks

Phone Type: snom821-SIP VPN: Off MAC-Address: 0448C4C31F69 (fake address, just for illustration) IP-Address:10.0.10.93 IP-Address(v6): Firmware-Version:snom821-SIP 8.7.5.35 My current Orig and Term provider it's VoIP Innovation. My VPS Debian 9.4 x64 Fusion PBX v...

Does anyone have Fusion templates for the new Cisco phones? (Cisco 6800 series, 7800 series, and 8800 series) I have a (2) 8841 Series phones, (1) 8851 Series phone and a Key expansion module that I want to test out with Fusion. The phones look great and the price is not much more than...

Hi All, Would appreciate some insight into the provisioning templates and perhaps a pointer in the right direction! Using Fanvil X4G's and provisioning profiles just don't work for me. Also found reference to https://www.pbxforums.com/threads/yealink-t19p-e2.2585/ which sounds identical so...

Can anyone point me in right direction to find any information on the syntax available in the provision template files? For example here is an IF construct: {if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if} This also contains an isset() function. I would like to...

Wondering if there is a feature to invite another party to a conference using a telephone number configured on FusionPBX. Trying to connect or integrate the Jitsi to Fusion PBX, so that accounts created on the PBX can login and join the conference. Anyone who have an idea how this works?

Hello all, As you may know Yealink started using a different OUI for all its phones as follow 805EC0XXXXXX since September in 2017. We have an issue provisioning these phones since server doesn't replay back to MAC addresses like this. When 001565XXXXXX kind of MAC used we get provisioning with...

The Status > Registrations page provides the button to cause a registered device to re-provision itself. The button causes FreeSwitch to send a SIP NOTIFY message to the device, with differing "Event" property values, depending on the brand. We use Grandstream GXP2130/60's, and clicking that...

When setting up devices for provisioning, I've been assigning them to users on our system in hopes of allowing them to customize certain options for the device. However, I have yet to find any location in FusionPBX that actually uses this assignment. Does anyone know if it is, in fact, used...