gateway

Hello, I am migrating from 3CX to FusionPBX and can't get running the connection to the gateway. My sip account is bound the the hardware provided by the internet provider (Fritz!Box). The way I am using this in combination with my currently running 3CX ist that I have set-up a sip account on...

Hello all, I have configured gateway with inbound and outbound routes with Dial Plan: 11 Digit Long Distance calls are working fine when i just input number like 01711XXXXXX , but problem occurs when i dial saved numbers from contacts which is saved included country code +88 as incoming calls...

Hi All, I have built fresh install of FusionPBX with 2 NICs, one public facing and the other facing SIP Trunk Provider via private address with static route to their SBC. I am attempting to create gateway on default domain with proxy pointing to SBC IP Address and register set to false but am...

Hello all. Just got up and running with Fusion yesterday. Pretty exciting! I don't know if I was tweaking settings improperly, but my gateway registration went down for awhile, so no phone service. This is obviously a bad thing if a customer is relying on their phone to work 24/7. Is there a...

Hello, for each user I have 3 extensions, something like 3 companies. no problems with incoming calls but how to make extension 101 call through first gateway, extension 102 call through second gateway and etc. maybe someone can suggest something. option to make 3 domains, in this case not need.

I have two sip-trunks from one provider, on my PBX, and there is some issues with simultaneous work, and my SIP provider advises to set different ports on every sip-trunk, but I cant find such setting on gateway. Can someone point how should change this port?

I have two sip-trunks from one provider, on my PBX, and there is some issues with simultaneous work, and my SIP provider advises to set different ports on every sip-trunk, but I cant find such setting on gateway. Can someone point how should change this port?

Hi All, I have experience with Nortel PBX and Comdial (pseudo)PBX and have also set-up a 3CX then Asterisk/FreePBX for home use. I have heard good things about FusionPBX and wanted to give it a spin, again for home use. for my Asterisk config I am using Analog PSTN, GV via Obihai devices and...

Hello Gents, I have multiple carriers, and I would like to know if someone can assist me on how to configure all my inbound calls to a specific trunk. I would like to use one carrier for outbound and one carrier for inbound. How do I configure to push my inbound calls to that one Trunk.

Hi so i've fusionpbx and provider is sending calls from different IP address. he using caller ID with Extension ID i've 2 Incoming routing (this is not set by me its maybe from provider or customer itself) somehow i can see come lands in Fusionpbx but never reaches to extension 102 Can you...

Hi ive a client and he im so much stuck with him i need to know whether we can enter complete Subnet in Proxy rather than the static ip. please check attached below

Hi Guys, Hope you all are keeping well. Im in the process of setting up an IPv6 registration tunnel from Fusion. I think I have the correct setup done, but just getting FAIL_WAIT on the GW. Below is my fs_cli: freeswitch@fusionlab-ha1> 2020-08-12 09:21:11.262647 [DEBUG] sofia.c:4628...

Hi Guys, My fusionpbx is unable to make any calls to the outside. On my softphone, it always show "Temporarily Unavailable (code: 480) error". In the log, I can see it went through all the regex except any outbound rules I defined. I am confused how to make it work. Below is my log...

Hello, I have made a fresh install of Fusionpbx from the website on a Centos 7 server and when i create a gateway it does not start, i have made sure that the hostname field is blank. Can anyone please help me here ?

Hello, I have a Physical SIP Trunking from a Service Provider, Where they have given me a hardware with private IP. I am trying to register a gateway but i am unable to it. I have 2 Lan Cards, in one port i have the Lan with Internet Connection and on the other IP i have a direct line to the...

Hey Guys, Maybe somebody here can be kind enough to assist... I have a fusionpbx install with 4 extensions under 1 of the domains, If I set the inbound route to dial a specific extension, when I call in. it works... As soon as I set it to a ring group which calls all extensions simultaneously...

Hey Guys, I am a bit of a noob with FusionPBX but have found quite a liking in it... I am used to FreePBX and have now moved over... All of my SIP accounts are registering perfectly except for one. This SIP account can register perfectly on FreePBX, but refuses to register on FusionPBX... I...

Has any one successful configured a nexmo gateway for outbound calling? Inbound works fine but outbound I receive "488 SDP "NotAcceptableHere" back from nexmo. Per their suggestion I'm setting absolute_codec_string=PCMU, param name="rtp-start-port", and value="10000", param name="rtp-end-port"...

Greetings list, I am trying to make a TLS gateway working with my freeswitch. But it fails with below error. 2018-05-23 23:09:18.430176 [ERR] sofia_reg.c:2447 ab345b4c-b961-4d3a-97a9-f227b52a7240 Failed Registration with status Service Unavailable [503]. failure #58 Though I am perfectly...

Hi there, i setup fusionpbx and the extensions and got the isdn gateway to work. Now i have the problem, that the audio is only one way. Directly after setup everything, the audio works two ways and i don't know what changed sinced them. I saw into sngrep, but i found nothing false there. Any...