Search results

On a completely idle machine I still see packets on the loopback interface. You can see what is listening with this: netstat -ant | grep 127\.0\.0\.1 tcp 0 0 127.0.0.1:8021 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:5432 0.0.0.0:*...

The loopback interface is used by a number of processes including Postresql, Freeswitch and Nginx. What you are describing is probably normal behavior.

@DigitalDaz I have just done a nine and a half hour packet capture on a Yealink T21p E2. The phone has two accounts configured, one to our primary SIP server and one to a secondary SIP server (not failover). The servers are in different data centres and on different IP subnets. The TTL on our...

I don't know what they all were, this was on our SIP trunk platform and customers just put their own equipment on the trunk. The registration records are long gone. To be fair the issue may not have always been the fault of the endpoint, we have seen caching DNS servers that have not obeyed the...

Classic chicken and egg situation! The problem I see with "smart dns" is that there are a good number of endpoint out there that will not re-query the DNS until they are restarted. We changed IPs on a SIP proxy once, we ran the old and new IPs in parallel, but with DNS only pointing at the...

You system sounds pretty busy, when it comes to scaling and performance tuning there are no easy answers and certainly no quick fixes. Simply setting max sessions to 150,000 won't make it happen, your hardware and system configuration need to be able to support that number. The limits are...

How are you installing? I always use the Fusion install script on a clean machine build and have never had any issues with ownership or permissions (Debian system).

Hi, You are seeing this message because you have set auth-acl per extension. There is nothing wrong with this, but your extensions are on a RFC1918 private subnet so what is the risk of not having it? To answer your other question EXPSEC is the number of seconds left before the registration...

The following in cron.daily on my system were installed by the Debian installation: apt-compat bsdmainutils dpkg exim4-base logrotate man-db ntp passwd sysstat I notice you also have mdadm, this was probably installed by Debian if you have software RAID. You can find out what files have been...

Only fusionpbx-backup and fusionpbx-maintenance are added by the FusionPBX install. The backup is useful to run daily, by default it keeps compressed archives of Fusion itself and recordings, voicemail and other configuration for two days and it keeps a backup of your database for 4 days...

Tim, uuid_dump is a Freeswitch CLI command. Log in to the CLI with fs_cli show calls will list all the currently active calls, the first field of each record is the calls uuid. Copy the uuid and then issue uuid_dump uuid_you_have_copied This will dump all the channel variables. I'm not sure...

Please don't take this post too seriously, I was just having some fun playing with regular expressions. I wanted to create a regular that would allow me to dial: 999 for the emergency services. 9999 for the emergency services but stripping the initial 9. 0xxxxxxxx etc. for national numbers...

Hi there, In /etc/freeswitch/autoload_configs there is a file called xml_cdr.conf.xml. On a default FusionPBX install there should be a line in there that looks like this: <param name="url" value="http://127.0.0.1/app/xml_cdr/v_xml_cdr_import.php"/> This URL is called by Freeswitch when a call...

In Advanced->Variables...

Call something like *9664 (music on hold) from 102. You can then test the eavesdrop.

Was 102 active with a call at the time you dialled *33102? It will hang up immediately after the pin if there is no call to eavesdrop on.

OK, for the benefit of others, I have worked this out by going through the .lua scripts. I discovered that in listen_to_recording.lua there is a test for the existence of two two channel variables: vm_say_caller_id_number vm_say_date_time If you set these to false in the *97 dialplan, it...

@bcmike I completely agree, have a look at the post below: https://www.pbxforums.com/threads/single-domain-migration-from-server-a-to-b.3733/#post-13159 I tagged Mark into the post but it didn't go anywhere, I appreciate Mark is very busy with other much more important work at the moment. As...

Sorry, I mis read your error. It does clearly state the problem is in message_send.php. The reason this is being thrown is because you do not have a valid URL as the first parameter to the http_request function. message_send.php expects this URL to be set in the session variable...

Hi Ian, I upgraded a system on Sunday Fusion 4.5.11 pulled on Jan 21st Freeswitch 1.10.2 Debian 10.2 I too have SQLite DB in RAM. When I made the new box live, I had an influx of registrations and this caused some SQLite busy warnings, but I have not seen them since. 2020-01-26...