Search results

I had a terrible experience with these guys and dumped them as soon as I could. During the port-in phase, they gave me a 20 minute notice on the FOC. When I contacted them to have it postponed, they told me there would be a charge for that. Before I could reply, they ported the numbers...

Create your 2 different gateways Create an outbound route with this as the first condition: condition ${outbound_caller_id_number} ^(700)$ . blah . blah . blah action bridge gateway_name repeat for 701

Create an outbound route with this as the first condition: condition ${outbound_caller_id_number} ^(1000|1001)$ Create a 2nd outbound route without this condition and make sure that it has a higher order number than the above route.

I have the following for sale - make a (reasonable) offer 2 x HP DL320 with 2 x 5420, 16GB - no rails, 2 x 250GB 2 x HP DL360 G7, 2 x 5670, 96GB RAM - one has 8 x 300 GB SAS that were new when I put in and have been used for testing only - total run time bout 3 weeks, the other has 1 300 GB SAS...

I'd like to be able to route calls between domains instead of hairpinning on the PSTN. There are 2 instances where this would be useful; 1) Generally, if a call is made to the DID of another domain, call it directly 2) Transfer calls between domain, perhaps using a * sequence

I used to block all address except my customer's but then we started offering a mobile client and that made it mandatory that we do not block any addresses. I have an ACL on my router that blocks most RIPE addresses and some other large blocks that I have identified as being potentially bad. I...

Got it figured out - everything is easy when you know how to do it.

I have a new customer that has Polycom 550 phones; I have used these before. The phones come up just fine with the standard template, however, there is no local digit map for the phones. I know how to create standard digit maps, but where does this go? In the sip.cfg file? phone1.cfg file...

I'm not sure what was going on, but here's the sequence of events: Phone was previously registered on another domain I changed my DHCP option 66 to move the phone to a different domain I did a factory reset on the phone When the phone rebooted, it created a mac entry in devices in the old...

Turns out that I was using the correct string but there was/is an issue with fusion.

The string I have been using for DHCP option 66 for Polycom phones is no longer working. Can someone please post the correct line?

I've been using Alcazar for about 18 months, mostly as a secondary source for termination. I do have a handful of DIDs with them but moved most of them to my other provider because the monthly DID cost was on the high side. Their termination rates are pretty good and their support is...

How about a forum on various SIP providers - the good, the bad, and the ugly.